Modernity and Tradition in Asia Essay Example | Topics and Well Written Essays - 1000 words

Modernity and Tradition in Asia - Essay Example Modern history discusses the historical timeline after the middle Ages. It has two stages which include; early modern and the late modern periods. Contemporary history tells more about the period of historic events that are immediately applicable to the present time. Modern period is a period of important growth in various fields that include; politics, warfare, technology and science, these fields not only dominated the Western Europe and North America but nearly every cultured area on the world. Cultural nationalism is a body that mainly forms the modern political societies within an unsanctioned state authority hence it is a form in which a nation is defined by an inherited culture and it is a strong belief that interests a particular state. Role of cultural nationalism in china Cultural nationalism played some roles in the China community and made it what it is today. The China’s nationalism today (present) was produced by its pride in its history and its century of the humiliation at the hands of the west and the Japan. The Chinese nationalism had a positive impact that came all over during the post WWII era. Role of cultural nationalism in India Nationalism is commonly understood as a political concept hence, it is an ideology that provides source for the national integration, solidity and as well as seeking national independence from the colonial. Cultural nationalism has played a major role in the political reshaping of all the central Europe. During the post-WWII era nationalism emerged as a powerful force. It acted as a suitable system of acquiring economic aid and security declaration. During the post- WWII era nationalism reemerged as a serious factor in improving the worldwide political scene in the post cold war era. Modern Asian Civilizations Civilization is a controversial word that has been used in various connected ways. It is used to refer to the human cultures which are obviously complex in terms of science, technology and division of labor. The civilization advancement is usually and often measured by its progress in long distance trade, agriculture, urbanism and occupational specialization. 1. Japan The Japanese civilization began in approximately A.D. 400 when the Yamato clan who were based in Kyoto gained extreme control of family groups in the Western and Central Japan. In the 700s the Japan was influenced by China, this influence made the Yamato clan to set up a majestic court that was similar to that of the China. The Yamato ruling system contributed largely to the formation of the Japanese culture and its tradition that stated gods of the others s hould be venerated equally hence other people’s gods should be treated and be compared to their own gods (this Japanese tradition stills remains to date) (Matsumoto and Hosaka 1). 2. China China being an East Asian country has a large territory, an ancient history and a huge population. It has written records that date back to 4000 years. China is considered to be an ancient civilization that extends over a large area in the East Asia. China is among one of the four great world’s oldest civilizations and one among the most highly developed societies and economies. Most of the china’

3d Printing Technology Essay Example for Free

3d Printing Technology Essay Legitimate Concerns Facing 3D Printing Technology Executive Summary This research journal article discusses how 3D Printing technology may effect federal firearms regulations. The focus of the article is that, due to the development of 3D Printing technology, individuals, even people without technical expertise, now have the ability to use the new technology to produce guns at home much more easily than they ever have before. This behavior might bring great harm to society. However, if a comprehensive prohibition on using 3D Printers to manufacture personal weapons were implemented, it might defy the 2008 District of Columbia v. Heller Supreme Court decision. In fact, the increasing popularity of 3D Printing means lawmakers must decide soon whether or not to allow 3D Printing of weapons. 3D Printing either should only be allowed to produce things that cannot be used as lethal weapons. Or, secondly, it can be used to produce a physical, working gun. The second option might achieve advances in 3D printing technology and promote the development of firearms design. However, developments in 3D Printing technology are creating concerns that not only legitimate consumers but also criminals are able to â€Å"print† firearms at home. If the law doesn’t allow individuals to use 3D printers to manufacturer personal weapons like handguns, it might be illegal according to the Second Amendment of the Constitution, a provision which protects the right of individuals to possess firearms under the law. Specifically, under the 2nd Amendment individuals may have the right to create their own firearms for self-defense, and the right to the manufacture firearms technology and materials. Analysis and Critique In fact, 3D Printing technology is not brand new. This technology has been undergoing development for more than a decade. The reason it became more popular recently is because of decreasing usage costs, so more and more individuals have the opportunity to own 3D Printers for personal use. In my analysis and critique of this journal article, I will focus on three different areas: how well does it deliver information to the reader, how the product will evolve in the future, and what is my opinion of concern about 3D Printing technology relate to firearms production after reading this journal article. First of all, this article is well organized and divided into four parts. The first part introduces what 3D Printing is, and how it is possible to produce firearms using the technology. The second part explains why the sale and production of firearms are limited under federal regulations, and provides an overall outlook of the firearm industry. Part three includes explanations of how 3D printers may change firearms production. Finally, Part four describes the constitutional right to bear arms, and it also analyzes the extent to which Heller’s case may limit prohibitions on 3D Printing. Moreover, this article provides other critical information to explain key points. It is a very valuable introduction for a reader without a background in the subject who might not be very familiar with the IT industry or with the relevant legislation. Based on the data and supporting details provided by the author, readers will have a basic idea of the fundamental issues concerning the intersect ion of 3D Printing and weaponry. As a result, it relates the technology to big concerns about public security, and the author gives great examples of the various legal arguments on the topic. Therefore, I think this article is a valuable qualitative article that can expand people’s knowledge on the subject. Secondly, besides concerns about guns, there are no other disadvantages to the improvement of 3D Printing, which will make the operating cost of the technology increasingly cheap. Jensen-Haxel explains how 3D Printing actually works in his article: The process begins with a digital 3D model created using Computer Added Design (CAD) software. The software automatically slices the model into a stack of thin horizontal cross-sections about 0.1mm in height. The, 3D printer then builds the physical model by depositing material layer by layer. At the same time, 3D Printers are getting smaller and smaller, which will make it easier for consumers to have their own machines at home. This changes the old production model. Nowadays, people are allowed to produce whatever they want using a 3D Printer, all they need are the required data and materials. In fact, because of the development of the Internet, it is easier than ever for people to find these resources online. Evans states that: The quickest way to get started with 3D printing is simply to find models online that others have already created and shared on the Internet. The online 3D printing community is growing all the time, so more and more things are being shared every day. Therefore, the limitations of self-production have shifted from hardware difficulties to software or materials issues. The technology is becoming simpler to use, but it might harm light manufacturing industries because some designers may be able to use their own 3D Printers to produce a sample instead of finding established producers that use traditional manufacturing methods. Because of these improvements, the potential for 3D Printing is bright, but the light manufacturing industry might be negatively affected by it. Finally, the author argues that the rapid improvement of 3D Printing and the increasing convenience for individuals to produce things with it is both a major concern and a tremendous possibility. Should individuals receive the right to do whatever they want with 3D Printing technology, even the ability to â€Å"print† firearms? The topic of gun safety has become especially relevant since the school shooting in Newton, Connecticut last year. More and more people are arguing about if the government should make some changes to firearms regulation. Jensen-Haxel wrote in his article that: â€Å"As the power of production passes from industry to consumer, many areas of the law may be caught unprepared.† (P.448) Concerns about the rate of technological progress outpacing regulations are not limited to 3D Printing. Because of the relentless improvements to technology, more and more challenges will occur as regulators try to manage new technology. The fact is, in most cases, laws only change after a new problem occurs, which means that new products will often exist in a legal gray area before rules can be changed. How the government deals with this issue might be a big concern in the following decades. To sum up, this article first introduces 3D Printing technology, and gives an example how 3D Printing has been used to â€Å"print† a firearm. As a result, the author relates this new technology to a regulatory concern. Within his argument, he provides lots of legal information, and then tries to point out a fact that some gray areas exist because regulation usually develops slower than a new technology can. Back to this article, is seems like the future of 3D Printing technology in unclear until the government resolves the legal issues concerning manufacturing weapons with this technology. Reference Evans, B. (2012). Practical 3D printers: the science and art of 3D printing. New York: Apress. Jensen-Haxel, Peter (2012). 3D Printers, Obsolete Firearm Supply Controls, and the Right to Build Self-Defense Weapons Under Heller. Golden Gate University Law Review; May2012, Vol. 42 Issue 3, p447-496, 50p

Internal Communication and Organizational Changes

Internal Communication and Organizational Changes Internal Communications and Organizational Changes Budi Santoso Introduction Institutional changes are unavoidable. It happens to any kinds of organizations; no matter how stiff the structure is (we can take military institution as a sample). One significant factor that holds important role in the process of change is communication. Change, however, requires communication supports, not only formal but also informal. When interaction and social doings among leaders and staffs within organizations has to be established according to the needs of change, communication about this is necessary (Vos and Schoemaker, 2001, p. 101). Therefore, internal communications holds a vital role to make a desired change successful. The basic idea of this is that internal communication’s role ranges from communicating to stimulating the process of change (Vos and Schoemaker, 2001, p. 100). In this paper, writer should focus on one of internal communications functions, namely, communicating the facts of the intended change to the inside stakeholders. The reason for this is that changes can possibly create a lack of clarity and uncertainty amongst inside stakeholders (Vos and Schoemaker, 2001), hence the need for information is relatively large. More importantly, to communicate the change to staff and employees is a significant initial phase within the whole process of change. Organizations, as stated by Vos and Schoemaker (2001), are basically based on collaboration (p. 81). All sections are interconnected, and by that, are interdependent. All parts are directed to involve in mutual cooperation to realize or achieve organizations’ goals which are usually manifested in their missions. The output of mutual cooperation among all segments is based on the quality of internal communication which takes place. Organizational structure cannot obviously be separated from internal communication as it, essentially, is resulted from communication process that happened continuously within an organization. Structures save us time and trouble, while they help us build on past experience (Cheney et al, 2004, p. 20). However, the climate of internal communication of an organization should actually be developed from symmetrical systems of communication. In this paper, I try to explain how the organizational structure regulates internal communication climate in organizations, as the way in which people communicate depends strongly on the nature of organization (Vos and Schoemaker, 2001), by giving reasonable arguments which I elaborated from several sources. Organizational Structure Cheney et al (2004) symbolized structure of organization as a skyscraper: a tall building with many rooms and main parts, such as pillars or roofs, which are used to hold the whole divisions to stand up. The main part of organizations, then, is the communication atmosphere which colors the works spirit of all manpower to give their ideas, energy and services for the sake of their organizations. Online business dictionary (2007) defined organizational structure as formal and informal Framework of policies and rules, within which an organization arranges its lines of authority and communications, and allocates rights and duties. Organizational structure shapes the manner and degree to which roles, power, and responsibilities are delegated, controlled, and coordinated, and how information flows between levels of management. Structure is aimed to give shape and direction to internal communication activities that take place, whether it is vertical or horizontal. On the other hand, type of structure determines coordination and cooperation process within organizations. Internal communication is vital if an organization is to function properly (Vos and Schoemaker, 2001). Internal communication climate and structure of organization Grunig, in his writing Systems of Internal Communication (1992), quoted Schneider (1985), wrote that the concept of communication climate came from organizational psychology. It refers to a psychological atmosphere in organization like warm, tolerant, and participative. The values of communication climate can cover some features such as consistency, credibility, trust, openness, accuracy and frequent communication. However, there are also negative senses such as intolerant, rigid or imbalanced communication atmosphere that could result in ineffectiveness in organizations. Effendy (1983, in Ruslan, 2007) internal communication which exists in organization can be categorized in three. First is vertical communication. This kind of communication is centered on two ways aspect. Downward and upward communications principally are manifestation of vertical communication. Nonetheless, in downward style, management stands the instruction, information, explanation, or delegation to person in charge in the units or their subordinates. In upward, subordinates give reports, suggestions, or even complaints to their direct managers. Second is horizontal communication. This sort of communication takes place amongst ordinary employees or staffs, or managers in the same level. Cross communication can also be come about in horizontal communication. Presently, structure of organizations has massively been developed. The most common and traditional type, bureaucracy where most decisions are centralized, has no longer been the one and only, even though some big business and governmental offices still use it. The terminologies such as boundaryless or virtual organizations have been popular amidst organizational scholars and adopted by many organizations. Some high-tech firms in Silicon Valley, USA, for instance, have been organizing themselves to implement a relatively flat structure (Cheney et al, 2004), where the decision making power is distributed and the divisions have varying degrees of autonomy. Flat structure is often used by organizations where their works are fundamentally about new ideas (Cheney et al, 2004). This happens as a result to cut off the stagnation in communication flows within the organizations and to drive a favorable work atmosphere. Vos and Schoemaker (2001) confirm this by saying that structure offers a framework for the processes occurring in organizations. The differentiation and specialization in organizations as described in units, or departments may probably be potential to induce unclear communication processes, particularly in big organizations or corporations who applies rigid bureaucratic model. Specialization, in other words, may mystify and exclude other departments’ staffs since each has its own language or jargon. Organizations with many divisions or levels will be likely to have more basic problems in their internal communication compared to organizations who adopt simple structure, if procedures and guidelines are not established in good order. This means that inconsistency in performing the guidelines, for instance, may emerge unclear job responsibilities and, in turn, can lead to significant communication problems. More divisions, levels or employees, of course, will cause extra managerial efforts to reach mutual relationships to get common sense in reaching organizations’ ends. Vos and Schoemaker described this condition by stating that communication problems about who is doing what can originate in problems of the structure (2001, p. 96). Simply saying, flat and fluid organizational structure may give leaders more chances to interact informally with their subordinates to get feedback or to give constructive motivation. Motivation, as one important factor to achieve work quality, can be improved by the way leaders communicate. Leaders may increase their credibility before the employees by, perhaps, showing them their trustworthiness, openness and appreciation. In some extent, these characters can raise employee’s motivation to improve their job performance as well as to experience job satisfaction. Writer tried not to say that flexible or simple structures are better than conventional ones, as they have their own strength and weakness. However, the type or size of organization which can be drawn up from its structure undeniably also affects the way internal communications carried out and determines the quantity and quality of it. Military institutions, for example, may not have fluid and informal structure since their philosophy is based on chain of commands and thus, centralized. If an army adopts fluid structure, it can even jeopardize its internal communication since there is a solid system in rank stratification. Communicating the Change Internal communications is required not only to let members of organization know about the change which is going to take place but also to keep the process of it running properly. Cheney, Christensen, Zorn, Ganesh (2004) stated that communication is the means by which change is implemented, as implementers negotiate plans, announce changes (p. 339). To communicate the facts about the desired change to inside stakeholders, in this case shareholders, staff and workforce calls for good strategies. Excellent internal communications plans and actions are needed to result in less-turbulent reaction of the insiders. It is a common thing that not everyone in organization becomes aware or even expects changes. And yet, as told by Cheney et al (2004), change is considered successful if it is accepted by key stakeholders rather than rejected; is compatible between the intended use of designer and the actual use of user; and give benefit to the organizations as well. The prominent key of announcing the intended change is based on how to handle the flows of information regarding the change itself. Vos and Schoemaker underlined that Information about change should be managed well and provided timely to prevent rumours (Vos and Schoemaker, 2001, p. 110). This entails the need that inside stakeholders would better receive the information from the management directly and at the first place, not from external parties such as media or their counterparts from other organizations. The facts should be communicated as clear and concise as possible to reduce uncertainty and anxiety among them. Furthermore, management should consider the possibility of messages may not be heard or be met with cynicism of the stakeholders. Mental noise may stop people from receiving messages. Practical ways to support the change It is crucial that management classifies and selects message delivery methods which suit the circumstances and the need of the receivers by conveying the information constantly and frequently as well as using selective channels that fit to types of target stakeholders. For instance, if the change is large-scale and will relatively give profound impact to most frontline employees, like downsizing or outsourcing, it is much better that the top executives not to directly communicate this to them. It will be more appropriate to delegate this task to frontline supervisors as frontline employees usually do not trust top executives (Cheney et al, 2004, p. 331). Frontline supervisors may have closer and more emotional relationship with frontline employees than those at middle or top management. Trust is usually built on intense, direct interaction. Basically, management can communicate the change through multiple channels, including speaking, writing, video, training, focus groups, bulletin boards, Intranets, and more. Again, it always depends on the kinds of changes. For example, management can apply internal media like bulletin boards or intranet as well to introduce a new design for corporate newsletter. Using generally accessible internal media to announce a small-scale change seems to be better than personal ones as this can save money and energy. This means that organization treats all stakeholders (staff and workforce) equally to give everyone fair notice of the change (Cheney et al, 2004, 332). Especially to shareholders, personal approach or media like individual calls or special meeting may be more effective as they own the organization and their claim on organizational resources is often considered superior to the claims of other inside stakeholders (Jones, 2004, p. 32). Persuading those who do not accept (opponents) or are still floating (potential promoters and hidden opponents) concerning the change is included in communicating stage. It is very possible that management will get resistance from shareholders, staff and employees who feel uneasy. They may think that the change will bring uncertainty to their future and may threaten their positions (some kinds of changes like downsizing or restructuring will, indeed, threaten some people). Basically, rejection and uncertainty could also be possible as a result of lack of information about the change itself. To cope with it, management can arrange a kind of meeting, for instance, small group gathering, and invite this group or its representatives to talk over about the change by giving clear and comprehensive understanding about it. On the other hand, in persuading the resistance, negotiation may appear to be a wise way to compromise with the existing interests. At this stage, the planner should stimu late the process of change by providing transparency. Communicating the change also includes facilitating the process of change by giving appropriate trainings or exercises to keep the change in line with the programmed procedures. Facilitating the change is directed to provide more information through education for the involved stakeholders to strengthen their knowledge and skills related to the change. In this stage, getting and providing regular feedback and updates will be useful. It is important for executives and managers to know what sorts of responds emerge, such as acceptance, commitment, and productivity (Cheney et al, 2004, p 330). Taking feedback is not a linear process which is conducted only at the end of the intended change. It is actually a circular process that covers the whole phase of the change. For instance, an input from employee about the new-adopted administration filing system may force a reconsideration of the original formulation. By getting feedback, management can measure the ongoing process and do improveme nts if needed. Conclusion As a summary, writer finds out that in order to achieve successful desired change, organization should be able to constitute applicable communication plan to announce the change to their inside stakeholders. Well-planned strategy mitigates chances that the change will be rejected by inside stakeholders. Proper action will ultimately increase the organisation’s ability to get and take feedback effectively. Writer also comes to a conclusion that structure of organization really affects the climate of internal communication. On my perspective, today’s organizations need to have more fluid and flexible structure in order to have clearer and transparent communication flows. But, I believe that organizational structure is not the only thing involved as there are some other significant factors like culture or economic reasons which also have to be taken into account. However, we should remember that based on the fact, 90 per cent of intended change were not suitable with the expectation (Becht, 2008). This implicates that actually the successful change is not merely determined by the methods it is communicated. The current internal communications climate in the organization may possibly affect the successful of the change. Bibliography Becht, Agaath. 2008. Presentation on Change management, presented on January, 17 2008. The Hague: The Hague University. Cheney, George. Christensen, LT. Zorn, JR, TE. Ganesh, Shiv. 2004. Organizational Communication in Age of Globalization: Issues, Reflection, Practices. Illinois: Waveland Press, Inc. Jones, Gareth R. 2004. Organizational Theory, Design, and Change (4th Edition). NJ: Prentice Hall Vos, Marieta. Schoemaker, Henny. 2001. Integrated Communication: Concern, Internal and Marketing Communication (2nd Edition). Utrecht: LEMMA Publishers Organizational Structure. (2008, January 10). BusinessDictionary.com, The free online business dictionary. Retrieved January 10, 2008, from Business Dictionary Website: http://www.businessdictionary.com/definition/organizational-structure.html *Dosen PNSDpk Kopertis II Palembang

Philosophy of Teaching Essay -- Teachers Education Essays

Philosophy of Teaching Children are not required to have real jobs, but they are required to attend school everyday. A teacher’s job is to show children how to make special use of their time and value their educational opportunities. Students do not get paid for their eight a.m. to three p.m. job, but they will be rewarded for the work that they put in. Teachers will only be truly happy and successful if they are dedicated to working hard and providing a positive attitude for their students. The real reward will be the success of their students and the growth of their knowledge of the world around them. I have observed that becoming a teacher is different from training or studying for any other job. Teachers bring their work home with them, both literally and figuratively. All teachers need to bring home papers to grade and lesson plans to work on; yet, becoming a real teacher means taking the job more seriously. Teachers are mentors who tackle little problems that a particular student faces. Teachers deal with the challenges of making lessons fun, creative, and effective. Being a compassionate, caring teacher is a difficult task because educators only have limited time to really make an impact on their students. Most classes only last about forty minutes each day. However, a teacher can make a lifelong impact on the students if he or she devotes energy and creativity for the benefit of the students. I do not think that there is any one teacher who is perf...

Types of Computers Esay

Overview A computer is an electronic device that receives (input) data, processes that data, stores data and produces results (output). Computer can be classified according to their data representation that is functionality, based on their purpose or based on their physical size. It’s the classifications that bring about types of computers.There are four types of computers that is, micro computer, minicomputer, mainframe computer and super computer. 1. 2 Justifications Understanding the types of computers will be helpful in determining whether it’s suitable for the intended purpose. For example if it’s a simple task for an individual or small organization then the microcomputer will be more suitable than a main frame computer which serve large organization. 1. 3 In brief In this essay we define what a computer is in detail in terms of the input, process and output.The features, purposes, functioning, subclasifications and costs of the four types of computers are also discussed. 3. 0 TYPES OF COMPUTERS 2. 1 Defining A Computer According to Saleemi (2009), â€Å"A computer may be defined as a machine which accepts data from an input device performs arithmetical and logical operations in accordance with a predefined program and finally transfers the processed data to an output device. The definition of computer can be viewed broadly in three major cases as illustrated below: Input Process Output Data and instructions Execution and storageInformation â€Å"(All computers can perform the functions of inputting, storing, processing, controlling, styling and outputting data and information (Ravichdndran, 2001 pg2). † It works upon the input data using the issued instructions, this means that the computer cannot do any useful job on its own; hence it’s a clever fool. The term GIGO is also oftenly used to explain this notion that is the computer can only work as per the instructions sets issued, hence if instructions sets conform to t he solving of the problem at hand then it will do it even faster and accurately.But if instructions set do not conform to the solving of the problem then the computer also solves it in the same manner of the instructions set. Hence Garbage in Garbage Out (GIGO). There are varieties of computers with a variety of their operational characteristics. The computer can be classified in many useful ways depending on the objective of whoever is doing the classification. 2. 2 Four types of computers compared The four major categories of computers based on their physical size are micro computers, mini computers, mainframe computers and super computers.These categories are based on the differences in size, speed, processing capabilities and price of computers. Due to rapidly changing technology, the categories cannot be defined precisely. For example the speed used to define a mainframe today may be used to define mini computers next year. Some characteristics may overlap categories still; the y frequently are used and should be understood. Mainframe computers They are most expensive of all computers and very big in size and offer the maximum computing power (Saleemi 2009).They are generally used in large networks of computers with the mainframe being the node point of the network. Smaller computer or terminals are then attached through satellites so that data could be centralized at one place will data processing could be performed via the satellites. A good example is the airline reservation system. The airlines have a mainframe computer at their head office where information of all the flights is stored. Small computers installed at the booking offices are attached to the central data bank so that up to date information of all flights is always available.According to Saleemi (2009) important characteristics include * These are big general purpose computers capable of handling all kinds of problems whether scientific or commercial. * They can accept and transfer data fr om input/output devices at the rate of millions of bytes per second. * They accept all types’ high level languages. * They can support large number of terminals. * Their processing speed is up to several billions of instructions per second. They have a large online secondary storage capability and can support a large number of and variety of peripheral device like magnetic tapes drives, hard disk drives, visual display UNITS, printers and telecommunication terminals. * They usually have high speed cache memory which enables them to process applications faster than mini or micro computer. Mini computers The mini computers are medium sized computers. They are physically bigger than the micro computers but smaller than the mainframe computers.Due to advanced circuit technology some mini computers are almost the size of micro computers. They support average internal and backing storage, that is their storage capacity both internal and external are comparatively higher than the mi cro computers but lower than the main frames (Saleemi 2009). These computers support several users at a time, that is several work stations or terminals are connected to one central minicomputer whose resources (e. g. C. P. U time, storage media, memory etc) are shared among the users connected.If central computers and terminals ate networked (WAN) then telecommunication links are used for a network within the same locality, on the other hand, the cables are used in connecting the terminals and the host computer. The later network configuration is known as local area network (LAN). At the workstation the information is output through the terminal screen or a printer. Sometimes the output can be at the central computer e. g. through a shared printer (usually line printer). Mini computers are used mainly in medium scale business functions. In business they are being used for invoicing stock control, payroll, sales analysis etc.Micro computers According to Saleemi (2009), â€Å"These are computers of advanced technology that become available in late 1970’s. They are the most common form of computers in most offices today as desktop, personal or stand alone systems†. Their design is based on large scale Integrated Circuitry (LSIC) that confines several physical components per small element thumb size I. C (integrated circuit), hence the size dramatically reduced. Their internal memory is smaller than the mini computers and main frame computers. They support limited backing storage media. They are cheaper than the mini and mainframe computers.Where the micro computers are used as terminals, that is connected to the central computer for enhanced processing beyond its capabilities then communication facilities are also to be provided. In small business the micro computers are used in several Min functions that require information to be produced e. g. purchasing, sales, marketing, production, accounting, in word processing for the production of business documents etc. Two popular series of micro computers are the personal computer (PC) and apple Macintosh. Micro computers nowadays come in varied sizes: Desktop computer – Largest and designed to fit entirely on or under a desk or table. * Laptop /notebook computers – second largest and designed such that can be placed on user’s laps. * Palm top computers – smaller and designed so that can be placed on users hand. * PDA (Personal Digital Assistant) – it’s also hand held and provides personal organizer functions such as calendar, appointments etc. Super computers Super computers are the largest, fastest, most expensive computers ever made. They are sometimes referred to as monster computers and have the processing speed of trillion of instructions per second.In many installations super computers are used for limited classes of computations. These computers are often used in numerical application like weather forecast, large matrix calculations such as those required for linear programming to solve problem in economic program or some military statistics. A small number of super computers are built each year for use in applications requiring complex, sophisticated mathematical calculations as in large government research agencies, military defense system, national weather forecast agencies, nuclear energy research, and petroleum exploration etc. 4. CONCLUSION 3. 1 Summary This essay has comprehensively discussed what a computer is in terms of input, process and output. The superiority of the super computers over all the other computers has also been captured. Subclasification of the micro computer thus desktop, laptop, palmtop and personal digital assistant has also been discussed. 3. 2 Insights The development of computers from mainframe to micro computers and super computers is evident from the essay. It’s also worth noting that the advancement of micro computers will continued to diminish the importance of the ma inframe / mini computers. . 3 Recommendations Given that computers facilitate more accurate and faster processing of data developers of computers should invest more in research and development. This will ensure that the computers available in the market for personal or SME use have not only enhanced capabilities but also affordable costs. REFERENCE LIST 1. Saleemi, N. A. (2009). Information Technology Simplified. Nairobi: Saleemi Publications. 2. Rauchandran, D. (2001). Introduction to Computers and Communication. New Delphi: Tata McGraw Hill.

Book Report The Essential Guide to Writing a Catchy Book Report

Book Report The Essential Guide to Writing a Catchy Book Report WHAT IS A BOOK REPORT? A book report is a kind of essay that sums up, explains or reviews a given book. It can be either factual, asking the student to state and enumerate the facts or analytical, where the student is required to analyze plot, characters, themes, ideas etc. How to Get Ready to Write a Book Report Writing a book report is unthinkable about actually reading the book. The sad part about it is that proper preparation requires you to read the book at least once or more (sorry if you don’t like to read!).  So, the first part is just reading for enjoyment. You should get a general feeling, understanding of what the author is trying to say in the text and grasp its main message. You should get acquainted with the setting, plot, and characters of the book, pick major themes, understand the general setting. If you are an advanced reader and are able to work on the go, you can grab a pencil and a sheet of paper and write down your thoughts and ideas regarding what you have read. These notes will later become an important part of your book report.  In case you are not so experienced with reading and analysis on the go, the best way to work with the book is to read it once, then put it aside for a day or two and then come back to it. That way the information you process will settle down and you will be able to generate ideas. As soon as you feel you are ready, get that book in your hands for a second pass. Ideally, you will need to scan through the book bearing the topic of your book report in mind. Concentrate on what your teacher wants you to do, take notes. HOW TO WRITE A BOOK REPORT Formatting Structure Formatting your book report is probably the easiest part of the paper. It is best to work on it once you are totally done with the entire text. Formatting a book report is generally done according to APA standards; however, MLA formatting is not uncommon. As to the structure, the book report format is a kind of essay and will, therefore, take the basic essay structure and format. Reiterating what has been said, the structure of your book report should include the following parts: an introduction (with the thesis), several body paragraphs and a conclusion. BOOK REPORT FORMAT Language and Tone A book report is completely factual. It has to revolve around facts from the book, and should also include the following information on: Author Title Place and year of publication A brief summary of the content of the book For this reason, language and tone should be objective, impartial and impersonal. Please note, however, that should your teacher require a personal book report format, you will be required to write using the first person, so once again – please check with your instructor prior to starting the actual work. TOP 25 BOOK REPORT IDEAS Book Report: Tips on Writing Post-Writing TIP 1. It’s a good idea to start writing by preparing an outline. If you have done some preparatory reading, the notes you have taken are ideal for this. Once you are done jotting down the points you want to mention, proceed by putting some flesh on the bones, provide details and develop the main ideas. TIP 2. In order to write an effective book report, you will need to elaborate your outline into a draft. The draft doesn’t necessarily have to be tidy and neat – its main purpose is to embrace all the ideas that come up to your head in the process. TIP 3. Once your first draft is finished, read through it and make sure it is relevant and logical. Throw out thoughts that interrupt the logic and flow of the paper. It’s a good idea to review your paper again within several hours after you complete your draft (don’t do it immediately unless absolutely necessary). TIP 4. After your draft has been polished into the final version of your paper, check your grammar and spelling. Try to use a word processor if possible. Typed book reports look better than handwritten ones. They are easier for your teacher to read and they are easier for you to correct. BOOK REPORT TEMPLATE If you feel like you need  additional assistance with crafting your book report,  feel free to contact any of our custom essay writing professionals.  Our writers are experts in book report writing; they are only taking on assignments on the books they have personally read. In addition, there is a number of writers who specialize in book report writing; there are also some who have professionally explored and researched certain areas of literature and are experts in the field.  Whatever your requirement is, we know how to write the perfect book report! is available 24/7 to help and guide you through the writing process.

GCGDAs Project Management

GCGDAs Project Management Introduction Project management plays a foreground role in the utilization of organizational resources and achievement of the organizational goals. Project management inculcates processes, activities, systems, structures and people in the organization.Advertising We will write a custom essay sample on GCGDA’s Project Management specifically for you for only $16.05 $11/page Learn More It determines how the interplay between the mentioned factors contributes to the success of this organization (OConnell 1994). This study highlights the various issues that are cardinal for effective and efficient project management within the context of GCGDA. Project management in GCGDA’s perspective can be defined as an organizational function that integrates basic management elements such as organizing, controlling, planning, and coordination with strategic management practices. As such, project management provides the opportunity to the organization to expand, improve performance and ensure increased service delivery in games related issues (Project Management Institute 2000). The element of improvement, as touched in this case, implies that project management has inherent characteristic of change. Every aspect of project management must come with change which may influence the size, structures, systems, and activities within an organization. Project management has also been defined as the process which entails coordination of management, setting of organizational priorities, and support initiatives aimed at delivering benefits to a business entity. This definition incorporates the fact that projects may be range of single management activities or a portfolio of business activities aimed at improving the performance of the entity (Murray-Webster Thiry 2000). Project management involves different scenarios that depend on the nature of the organization. For instance, in a program based organization, projects are managed in order to achieve the strategic objectives of the business. Such organizations operate several projects at the same time where every department has its own separate responsibilities. The role of the project manager in this case is to ensure that all projects are aimed at achieving the overall strategic objective of the organization. The overall project manager delegates duties to the various heads of departments and coordinates their activities (OConnell 1994).Advertising Looking for essay on business economics? Let's see if we can help you! Get your first paper with 15% OFF Learn More The other scenario is a multi-project entity where programs are handled from a consolidated perspective. The projects in this case are also operated simultaneously. However, not all of them contribute to the objectives of the organization. The failure of one project does not affect the performance of other projects in the organization since they are not are not related, however, they share the same resources and may be managed by one project manager. This scenario can be applied to the GCGDA context where several project goals can be pursued. For example, currently the entity is working on a project to include wrest lining in 2014 Olympic Games, while at the same time organizing the venue for the games. The duty of the project manager in this context is to assess the performance of every project and determine the amount of resources that are required for each project (Project Management Institute 2000). Every project within the context of GCGDA is expected to enable the organization to achieve its objectives. The project should also enable the organization to utilize its resources effectively and improve its performance. On the other hand, the project manager is expected to be a good decision maker who has vast knowledge and experience in project management that are related to the issue of games. Moreover, the project manager is also expected to be a person who is respon sive to change (Murray-Webster Thiry 2000). Response To ensure success in this context, emphasis should be laid on the project goals and objectives, the project resources, the sources of project funds, and the key issues that affect the performance of the project. Key Issues The major issues in the project include project scope, risk factors, and project cost. The project scope entails all activities and programs that fall within the goals and objectives of the project. Risk factors in this case include political interference, changes in the rules and regulations that may affect the performance of the project, and issues such as labor problems. With regards to cost, ineffective cost management may lead to project failure (Project Management Institute 2000). Roles and Power of the Project Manager The project manager has the responsibility of ensuring the success of the project. The manager plans, controls, and coordinates the activities of the project. The manager also determines ho w resources should be allocated in the project. In collaboration with the board, the manager also assesses the performance of the project. The project manager also reports project information to the stakeholders who include the following: The chairman of CWG Representatives from different countries The project evaluation committee Sport entities such FIFA. Skills and attributes of the project manager GCGDA will expect the project manager to posses the following skills:Advertising We will write a custom essay sample on GCGDA’s Project Management specifically for you for only $16.05 $11/page Learn More Good decision making skills Good communication skills Ability to integrate issues of games into project management Ability to embrace and implement change Competency in management of games related issues Summary Project management plays a cardinal role in the improvement of organizational performance. The most important in project management is the p roject manager who should identify the type of scenario that is appropriate for the project and also identify the various key issues involved in the project. Project management requires proper coordination and communication between the manager and technical team that is charged with the duty of ensuring project success (Weber 1999). Project Control Project control can be defined as an action taken by the project management to correct deviations in the performance or a strategy that is needed to enable the project managers to overcome uncertainties. Project control compares the project activities and progress against the project metrics (Searne Thompson 2009). Project Management Control System At the initiation stage, GCGDA will be required to define the project scope, define the roles of the participants, provide information to the project participants, and initiate performance reviews for the project workers. With regards to design, the entity will need the following; design speci fications which may include the nature of games to be improved, design management software, and project time span. The construction requirements for control purposes will involve the following; size and location where games project will be pursued, project utility requirements, and project operational schedule (OConnell 1994). Project Control Elements Controls elements in a project are the variables that directly affect the performance of the project. GCGDA must embrace elements which include cost, time, scope, and resources such as labor. With regards to cost, issues such as cost control, cost management, cost forecasting are the major factors that affect project performance. The other aspect that is related to cost management is proper budgeting to ensure that the available funds can meet all the project requirements without difficulties. Methods used The success of control initiatives in project management depends on the approaches that are used in handling control. The common me thods include the following: cash flows, audits, inspections, EVA, and KPIs. Cash Flows Regulation of cash flows is another method of controlling project issues especially the expenditure of financial resources. A cash flow provides important information to the project manager by comparing the project’s income activities and expenditure. Cash flow control initiatives require from the project manager to determine the revenues of the project for every activity.Advertising Looking for essay on business economics? Let's see if we can help you! Get your first paper with 15% OFF Learn More The manager should also refine the actual cash flow and compare the actual and expected expenditures. One of the challenges that managers face when regulating cash flows is the issue of uncertainties and change (Searne Thompson 2009). Audits Project audit is reviewing the project objectives and goals to identify whether the project is able to meet the needs of the clients. The project audit should be conducted on a regular basis to identity particular areas of improvement during the project lifecycle. The main aim of the project audit is to ensure that project activities are in tandem with the goals and objectives of the project. It is also aimed at identifying various errors or sources of mistakes that may interfere with the attainment of the project objectives (Project Management Institute 2000). Project Inspection Inspection is another control initiative that is used in project management. Inspection entails a proper review of all the elements that are involved in project contro l. Inspection can be done on the operations of the project to determine whether they are in tandem with the expected project schedules (Ferns 1991). Cost inspection is conducted to determine the cost behavior of various aspects that are used in the operations. For example, an inspection of the labor cost will enable the project manager to identify whether the cost of labor is constant or changes according to the level of productivity and time. Inspection can also be done on the whole project to identify if the available funds are able to meet the budget (Reiss 1996) EVAs EVA in project management ensures that there is a common approach to monitoring the verification and validation of the project deliverables. The process identifies a verification method for each deliverable in the project (OConnell 1994). Reporting the Information Reporting the project information to the users must be done in a proper manner that enables the information users to get the right data concerning project development. Apart from the written information, the report will also contain the graphs, which will outline the expenditure, progress, risk factors, and cost patterns. The information will be targeting the project stakeholders such as sponsors of the project, committee, board of directors and the representatives of the participants that will use the project (Spencer Spencer 2008). How the Data Will Be Presented The project data will be presented in tables and graphs. For example, S curves will be useful in communicating the resources and the amount funds GCGDA has used in the project. The tools for reporting the information will include the following: Power point presentation Video conferencing Projectors Using the aforementioned tools will enable the project stakeholders to understand the project information. It will also enable GCGDA to conduct a proper audit of the project information. Some challenges may interfere with the reporting of the project such as unavailability of appropriate reporting tools, selection of the part to be reported, and lack of adequate time to give a detailed report. The information will also have to be changed according to the level of management. For instance, general project information will be reported to all the stakeholders while particular issues such as cost patterns and budget will be reported to the top management in the organization (Searne Thompson 2009). Summary Project control is very cardinal in ensuring project success in this regard, GCGDA should therefore identify the various control elements and establish effective control methods such as cash flows, inspection, auditing, and inspection. Communicating project control information should also be done using the most appropriate tools. Project planning Project planning is another important element that is cardinal for the success of the project. Different planning approaches can be adopted in project management depending on the context and the management style. Lean Time Planning Lean time planning technique is used in project management to ensure continuous improvement of the project processes and activities. It enables an organization to improve the quality of products by identifying and eliminating errors in the production process (Ferns 1991). Lean time planning is applied in manufacturing organizations where it is used to plan production processes. The main disadvantage of this technique is that it may lead to production failures, especially where â€Å"Just in Time† method fails to deliver the required inventory. Lean time planning may also interfere with resource allocation strategies designed by an organization (Project Management Institute 2000). For instance, the company may be forced to produce goods according to the designed production schedules, which may interfere with the resource utilization (Searne Thompson 2009). Collaborative Planning Collaborative planning can be defined as a planning approach where project mana gers design the project activities through close collaboration with the suppliers (Spencer Spencer 2008). The suppliers and the project team work together to determine the inventory utilization and delivery programs in order to avoid any form of delay that may interfere with the performance of the project (Weber 1999). The advantages of collaborative planning include the ability to create good forecasts since the supplier provides reliable information on delivery. The planning approach also enables the project management and the suppliers to create a joint plan for the project which is important in management of project resources, it also provides the project management with the possibility to monitor inventory. Collaborative planning allows the project manager to develop a framework for efficient flow of information from the supplier to the client (Weber 1999). However, collaborative planning may become hectic for the project managers, especially in circumstances where the project depends on many suppliers. It will be difficult to work with more than one supplier to ensure that the project activities are carried out collaboratively (Ferns 1991). Sometimes collaborative planning consumes a lot of time to get materials into organization and ensures effective utilization of it in case of the delays on the side of the supplier (Searne Thompson 2009). Collaborative planning also exposes the project to many risk factors which may lead to project failure (Project Management Institute 2000). Critical Chain Programming Critical programming involves a process where the activities of the project are planned for a long term orientation. This method of planning is useful where the project manager is interested in the long term objectives. Critical chain programming can be applied in situations where the project objectives should be achieved in stages (OConnell 1994). The project manager divides the project into various sections each with different objectives and timelin es. The resources of the organization also allocated to the projects depending on the time lime. Critical chain programming enables the organization to handle a complex project without lot difficulties (Spencer Spencer 2008). The other advantage is that critical chain programming ensures effective utilization of resources. The project also gives the suppliers the opportunity to deliver based on the buffer requirements for the project (Ferns 1991). However, critical chain programming has been criticized as one of the project planning approaches that could easily lead to project failure due to the fact that it takes a lot of time to plan for the resources and get the project aired in time. The approach may also waste a lot of resources due to regular changes in project scope and design and there is also close attention among the project participants to the project objectives and goals making it impossible to assess the project on a regular basis. Moreover, the critical chain programm ing method is difficult to coordinate since the project is divided into different sections that have different timelines (Project Management Institute 2000). The Last Planner The last planner method is a technique that predicts the workflows in project management. This method is applied in the construction sector where it enables the constructors to identify conflicts in operation to achieve master scheduling and also help in the identification of long term lead objectives. Despite the mentioned advantages, last planner approach may interfere with the normal working schedule since it is conducted on a regular basis. The method also gives more authority to the project supervisor while ignoring other individuals that are involved in the project, like the technical team for example (Weber 1999). Critical Path Method The critical path method is one of the planning techniques that are used in project management. CPM as a project planning tool enables the project manager to identify how t echnical activities and processes will be pursued. The planning approach is applicable in a scenario where there is a need to speed up the project due to limited time. In this approach, project activities are pursued in a given sequence where one activity leads to the next. This method is used in handling complex projects such as chemical processing. The main advantages of CPM include predicting the time needed for the project, providing a graphical view of the project and identifying activities that are critical (Searne Thompson 2009). However, critical path has some disadvantages which include overreliance on project software and the project cannot be pursued without software since it involves complex operations. The failure of one activity may lead to the failure of the whole project since the project activities take place in a definite sequence (Project Management Institute 2000). Summary Project planning is the key tool that in project management that enables effective utiliza tion of resources. GCGDA should use the best planning approach that is relevant to the nature of the project. Collaborative planning is recommended in this case since the entity will need to work together with the project suppliers. Reference List Ferns, D 1991, Developments in Programme Management. International Journal of Project Management. Vol. 9, p. 148-156. Murray-Webster, R Thiry, M 2000, Managing Programmes of Projects: Gower Handbook of Project Management. Gower Publishing, New York. OConnell, F 1994, How to Run Successful Projects, Prentice Hall, New Jersey. Project Management Institute, 2000, A Guide to the Project Management Body of Knowledge, Newton Square, Pennsylvania USA. Reiss, G 1996, Programme Management Demystified; Managing Multiple Projects Successfully, E FN Spoon, London. Searne, S Thompson, 2009, Control of Engineering Projects. Thomas Telford, New York. Spencer, L Spencer, S 2008, Competence at work, John Wiley Sons, New York. Weber, M 1999, The Theory of Social and Economic Organization, Free Press, New York.

Explore the Three Laws of Thermodynamics

Explore the Three Laws of Thermodynamics The branch of science called  thermodynamics deals with systems that are able to transfer thermal energy into at least one other form of energy (mechanical, electrical, etc.) or into work. The laws of thermodynamics were developed over the years as some of the most fundamental rules which are followed when a thermodynamic system goes through some sort of energy change. History of Thermodynamics The  history of thermodynamics  begins with  Otto von Guericke  who, in 1650, built the worlds first  vacuum pump  and demonstrated a  vacuum  using his  Magdeburg hemispheres. Guericke was driven to make a vacuum to disprove  Aristotles long-held supposition that nature abhors a vacuum. Shortly after Guericke, the English physicist and chemist  Robert Boyle  had learned of Guerickes designs and, in 1656, in coordination with English scientist  Robert Hooke, built an air pump.  Using this pump, Boyle and Hooke noticed a correlation between  pressure,  temperature, and  volume. In time,  Boyles Law  was formulated, which states that pressure and volume are  inversely proportional.   Consequences of the Laws of Thermodynamics The laws of thermodynamics tend to be fairly easy to state and understand ... so much so that its easy to underestimate the impact they have. Among other things, they put constraints on how energy can be used in the universe. It would be very hard to over-emphasize how significant this concept is. The consequences of the laws of thermodynamics touch on almost every aspect of scientific inquiry in some way. Key Concepts for Understanding the Laws of Thermodynamics To understand the laws of thermodynamics, its essential to understand some other thermodynamics concepts that relate to them. Thermodynamics Overview - an overview of the basic principles of the field of thermodynamicsHeat Energy - a basic definition of heat energyTemperature - a basic definition of temperatureIntroduction to Heat Transfer - an explanation of various heat transfer methods.Thermodynamic Processes - the laws of thermodynamics mostly apply to thermodynamic processes, when a thermodynamic system goes through some sort of energetic transfer. Development of the Laws of Thermodynamics The study of heat as a distinct form of energy began in approximately 1798 when Sir Benjamin Thompson (also known as Count Rumford), a British military engineer, noticed that heat could be generated in proportion to the amount of work done ... a fundamental concept which would ultimately become a consequence of the first law of thermodynamics. French physicist Sadi Carnot first formulated a basic principle of thermodynamics in 1824. The principles which Carnot used to define his Carnot cycle heat engine would ultimately translate into the second law of thermodynamics by the German physicist Rudolf Clausius, who is also frequently credited with the formulation of the first law of thermodynamics. Part of the reason for the rapid development of thermodynamics in the nineteenth century was the need to develop efficient steam engines during the industrial revolution. Kinetic Theory the Laws of Thermodynamics The laws of thermodynamics do not particularly concern themselves with the specific how and why of heat transfer, which makes sense for laws that were formulated before the atomic theory was fully adopted. They deal with the sum total of energy and heat transitions within a system and do not take into account the specific nature of heat transference on the atomic or molecular level. The Zeroeth Law of Thermodynamics This zeroeth law is sort of transitive property of thermal equilibrium. The transitive property of mathematics says that if A B and B C, then A C. The same is true of thermodynamic systems that are in  thermal equilibrium. One consequence of the zeroeth law is the idea that measuring  temperature  has any meaning whatsoever. In order to measure temperature,  thermal equilibrium  must be  reached between the thermometer as a whole, the mercury inside the thermometer, and the substance being measured. This, in turn, results in being able to accurately tell what the temperature of the substance is. This law was understood without being explicitly stated through much of the history of thermodynamics study, and it was only realized that it was a law in its own right at the beginning of the 20th century. It was British physicist Ralph H. Fowler who first coined the term zeroeth  law, based on a belief that it was more fundamental even than the other laws. The First Law of Thermodynamics Though this may sound complex, its really a very simple idea. If you add heat to a system, there are only two things that can be done change the  internal energy  of the system or cause the system to do work (or, of course, some combination of the two). All of the heat energy must go into doing these things. Mathematical Representation of the First Law Physicists typically use uniform conventions for representing the quantities in the first law of thermodynamics. They are: U1  (or  Ui) initial internal energy at the start of the processU2  (or  Uf) final internal energy at the end of the processdelta-U  Ã‚  U2  -  U1   Change in internal energy (used in cases where the specifics of beginning and ending internal energies are irrelevant)Q  Ã‚  heat  transferred into (Q   0) or out of (Q   0) the systemW  Ã‚  work  performed by the system (W   0) or on the system (W   0). This yields a mathematical representation of the first law which proves very useful and can be rewritten in a couple of useful ways: The analysis of a  thermodynamic process, at least within a physics classroom situation, generally involves analyzing a situation where one of these quantities is either 0 or at least controllable in a reasonable manner. For example, in an  adiabatic process, the heat transfer (Q) is equal to 0 while in an  isochoric process  the work (W) is equal to 0. The First Law Conservation of Energy The  first law  of thermodynamics is seen by many as the foundation of the concept of conservation of energy. It basically says that the energy that goes into a system cannot be lost along the way, but has to be used to do something ... in this case, either  change  internal energy or perform work. Taken in this view, the first law of thermodynamics is one of the most far-reaching scientific concepts ever discovered. The Second Law of Thermodynamics Second Law of Thermodynamics:The second law of thermodynamics is formulated in many ways, as will be addressed shortly, but is basically a law which - unlike most other laws in physics - deals not with how to do something, but rather deals entirely with placing a restriction on what can be done. It is a law that says nature constrains us from getting certain kinds of outcomes without putting a lot of work into it, and as such is also closely tied to the  concept of the conservation of energy, much as the first law of thermodynamics is. In practical applications, this law means that any  heat engine  or similar device based  on  the principles of thermodynamics cannot, even in theory, be 100% efficient. This principle was first illuminated by the French physicist and engineer Sadi Carnot, as he developed his  Carnot cycle  engine in 1824, and was later formalized  as a law of thermodynamics  by German physicist Rudolf Clausius. Entropy and the Second Law of Thermodynamics The second law of thermodynamics is perhaps the most popular outside of the realm of  physics because it is closely related to the concept of  entropy or the disorder created during a thermodynamic process. Reformulated as a statement regarding entropy, the second law reads: In any closed system, in other words, each time a system goes through a thermodynamic process, the system can never completely return to precisely the same state it was in before. This is one definition used for the  arrow of  time since entropy of the universe will always increase over time according to the second law of thermodynamics. Other Second Law Formulations A cyclic transformation whose only final result is to transform heat extracted from a source which is at the same temperature throughout into work is impossible. - Scottish physicist William Thompson ( A cyclic transformation whose only final result is to transfer heat from a body at a given temperature to a body at a higher temperature is impossible. - German physicist Rudolf Clausius All the above formulations of the Second Law of Thermodynamics are equivalent statements of the same fundamental principle. The Third Law of Thermodynamics The third law of thermodynamics is essentially a statement about the ability to create an  absolute  temperature scale, for which  absolute zero  is the point at which the internal energy of a solid is precisely 0. Various sources show the following three potential formulations of the  third law  of thermodynamics: It is impossible to reduce any system to absolute zero in a finite series of operations.The entropy of a perfect crystal of an element in its most stable form tends to zero as the temperature approaches  absolute zero.As temperature approaches absolute zero, the entropy of a system approaches a constant What the Third Law Means The third law means a few things, and again all of these formulations result in the same outcome depending upon how much you take into account: Formulation 3 contains the least restraints, merely stating that entropy goes to a constant. In fact, this constant is zero entropy (as stated in formulation 2). However, due to quantum constraints on any physical system, it will collapse into its lowest quantum state but never be able to perfectly reduce to 0 entropy, therefore it is impossible to reduce a physical system to absolute zero in a finite number of steps (which yields us formulation 1).

Controversy analysis Essay Example | Topics and Well Written Essays - 1500 words

Controversy analysis - Essay Example This essay reviews five articles on water scarcity and what they say or not say about wastewater management. Since water scarcity is growing day by day, being an important cause of the issue, can improvement in wastewater management help in solving the problem? As early as 1955, Packman argued that water scarcity is a national issue and must be resolved through policymaking, before it seriously derails the development of America, in the article, â€Å"Water for the Future.† He is an important source of information because he has presented an issue that not many reporters analyze and discuss during his time. Packman blames human mismanagement and the uneven distribution of fresh ground and surface water for water issues. He claims that the government and private sector should look into supporting diverse options to properly manage water scarcity, and these are: 1) efficient management of existing water resources; 2) reusing water, including wastewater; 3) increasing water suppl y through artificial rain production; and 4) improving research on water desalination. The strengths of the article are the use of authoritative sources and the emphasis on the issue and how to resolve it. Packer employs diverse credible articles to support his statements. For instance, he says: â€Å"Measures to combat water shortages must be based on consideration of the fact that water, unlike other resources, cannot be saved by non-use.† He supports this claim by providing evidence: â€Å"The conservation of water is not so much the saving of a decreasing' supply for some greater need in the future, as, for example, the storing of natural gas, but the control and use of water to the optimum advantage of all.† Packer gives proper in-text citation for his claims. Moreover, Packer effectively uses logos that can bring attention to urgency of water shortage. He underscores that water shortage is a reality, and to not manage water through different ways will result to d evelopmental and health catastrophes in the future. The weakness of the article is its lack of conclusion. Packer abruptly ends the article after discussing policy issues. He should have summarized his findings and discussed the implications of the policies and resolutions he proposed to increase the effectiveness of his argument. In â€Å"Global Water Shortages,† Mary H. Cooper expands the political implications of water shortages that Packard mentioned, and where she argues that the next wars and conflicts will not revolve around oil, but water, because of its scarcity and increasing demand from people of different nations and communities. She is an important source because she specializes in environmental, energy and defense issues (CQ Researcher). Before she joined The CQ Researcher as a staff writer in 1983, she worked as a reporter and Washington correspondent for the Rome daily newspaper l'Unita (CQ Researcher). Cooper claims that one of the most pressing underlying ca uses of territorial disputes is the shortage of water. Since countries are sharing water sources, they are doing everything they can to defend this basic need. She includes

Alexander the great Assignment Example | Topics and Well Written Essays - 750 words

Alexander the great - Assignment Example Within his lifetime as king of Macedonia, Alexander the Great was the one person who was able to build and reign over among the greatest empires and kingdoms in the history of mankind. He was only a young man of when he inherited his father’s kingdom, yet he became greater than many of the kings and emperors combined. â€Å"Thus, at the age of twenty Alexander inherited the kingdom of Macedonia, beset as it was by great jealousy, bitter hatred, and dangers on every side. (Freeman 39) Although immediately faced with troubles from every aspect, he was able to, at a young age, rule his kingdom wisely, powerfully and effectively. The size of his empire is evidence enough to prove that Alexander indeed was a force of greatness and good, yet his character also provides proof of his genius, intelligence and powerful command over his subjects. He had the great capacity and skill to gather power and overthrow a much stronger force. This strength and intelligence was greatly influenced by the teachings of Aristotle that prepared him to become the great king that he was. â€Å"To those who lived to see Alexander in Asia, this event foreshadowed many occasions on which his independence, intelligence and courage brought triumph after triumph.† (Hammond 146) Aside from the massive empire that Alexander ruled before he even reached the age of 33, he was also the catalyst of the conglomeration of the Greek culture and the other cultures in other nations such as Persian, Indian, and Egyptian cultures. This conglomeration of different cultures is known as the Hellenistic culture. During the Hellenistic Period, there was an outpouring of developments in the arts including literature, sculpture, architecture, music, theater and stage play. It also encompassed advancements in science, astrology, cosmology and mathematics. This era also underwent a time of heterogeneity. In place of considering and

Ratios Essay Example | Topics and Well Written Essays - 750 words

Ratios - Essay Example The ratio analysis will consist of a combination of ratios from three categories. The three ratio categories are profitability, efficiency, and leverage ratios. Three profitability ratios selected for the analysis are net margin, return on equity (ROE), and return on sales (ROA). The three efficiency ratios used in the ratio analysis are sales to inventory, assets to sales, and sales to net working capital ratio. The two leverage ratios selected were debt ratio and the current ratio. Appendix A shows the ratio calculations results for Target in 2009 and 2008 and for comparison purposes the ratios of Costco in 2010. The net margin shows the profitability of the firm by dividing net income by sales. High net margins are a desirable outcome. The return on equity shows how much profits are being created in relation to its equity investment. The return of assets shows how much of a return a company is obtaining from its assets. High ROA and ROE are desirable outcomes. The sales to invento ry ratio shows how well your inventory is producing sales. The asset to sale ratio shows the ability of the assets to generate revenue. The sale to working capital ratio is calculated dividing sales by net working capital. In fiscal year 2009 which ended on January 30, 2010 Target generated revenues of $63435 million (Annual Report: Tesco, 2009). This figure represents an increase in revenues of 0.88%. In 2009 Target had a net margin of 3.92%. The firm was able to increase its overall profitability by 0.40% in comparison with 2008. In order to compare the ratios of the company with a competitor we choose Cotsco. The most recent financial statements of Cotsco were released in fiscal year 2010 which ends on August 29, 2010. The net margin of Cotsco in fiscal year 2010 was 1.67% (Annual Report: Cotsco, 2010). The net margin of Target is better than Cotsco by 2.25%. The return on assets of Target in 2009 was 5.14%. This metric improved by 0.12% in comparison with the previous fiscal yea r. The return on assets of Target is inferior to Costco by 0.33%.The return on equity of Target in 2009 was 16.21%. The ROE of Target is superior to Cotsco by 4.29%. The sale to inventory ratio of Target in 2009 was 8.84. The financial metric was reduced by 0.54. The sale to inventory of Cotsco in 2010 was 13.83. Cotsco had a superior sale to inventory efficiency by 4.99. The asset to sale ratio of Target in 2009 was 0.70. Cotsco had assets to sales ratio of 0.31. The asset to sales ratio of Target was superior by 0.39. The sale to working capital ratio of Target in 2009 was 8.93. The sale to working capital ratio of Cotsco was much better at 47.38. The metric of Cotsco was superior by 38.45. The debt ratio of Target in 2009 was 1.53. Due to the fact that the company has a debt ratio above 1.0 it is in a favorable position to pay off its long term debt. The debt ratio of Cotsco was better at 1.85. The current ratio of Target in 2009 was 1.63 which is 0.03 better than in 2008. The fi rm is a good position to pay off its short term debt because the current ratio is above 1.0. The current ratio of Target is better than Cotsco by 0.47. The operating expenses of Target in 2009 were $13,078 million which represents an increase in operating expenses of 0.42%. The financial ratio analysis performed on Target led me to believe that Target is a good acquisition for the company. Target had excellent revenues and profitability numbers. The 3.92% net margin of the firm is better

E.E Cummings and His Influences to Writing Poetry Research Paper

E.E Cummings and His Influences to Writing Poetry - Research Paper Example Cummings was a controversial poet whose status was preceded by his poetic influence. It is noteworthy that Cumming grew in a strict Unitarian home (Dendinger, 89). However, this did not deter him from fulfilling his ambitions. He felt that his parents did not understand his free spirit, and the unique view he had about life. However, his liberated mind and the encouragement he was getting from his parents resulted into adoption of these controversial styles of writing poetry. In addition, his enrolment into school only functioned to fuel his thoughts about having a free spirit. Therefore, he did not take schoolwork as serious as anyone of his calibre was expected to by the society. In any way, it is while attending school that he developed the rebellion towards the frame of references of life. His attack on the mass mind and conservative patterns of contemplation as well as the restrictions the society had on expression originated from his staunch devotion to the person. He therefore believed in â€Å"the simple faith in the miracle of mans individuality’ (Bay-Cheng and Cole, 157). Therefore, in most of his works, he always blamed man, but idealised personality. He thus directed his critics against the foes of individual, by letting no man rest in what he believes he knows. The rhetorical function of his language is based on this foundation. Therefore, this shows that Cumming’s influences to poetry started at a tender age when he stared composing points at only ten years (Bay-Cheng and Cole, 157). This means that his open-minded and at times lenient parents encouraged him early in his life to delve into his creative side. In addition, Metcalf (374) notes that Dante who was an author but died even before Dante was born also influenced the early works of Cummings. This influence is reflected in the non-lectures that Cummings gave to the audiences he addressed. However, it was not Dante alone but also Dickens and Mallory. However, it is his controve rsial address to the Graduating class at Harvard University brought him into the public eye. This talk was about new art, in which he dismissed the admired poet Amy Lowell by referring to her as abnormal (Bay-Cheng and Cole, 160). Some of Dante’s influences are reflected in the passages of some of the works of Cumming such as â€Å"Inferno†. In this piece of work, overt references appear in brief in his passages (Metcalf, 380). Most of these references serve to underpin Cumming’s ironic and negative thoughts of the modern world. However, this influence presents itself in a different way when Cumming, just like Dante, goes through an onerous journey just to safeguard his free spirited claims. Dendinger (95) asserts that his difficult journey is talked about in the novel â€Å"Emmi† where he has quoted Dante’s optimistic visions towards life from â€Å"Vita Nuova and â€Å"Paradiso†. Another example of Cummings works is the â€Å"So shy shy shy† poem that has a conspicuous similitude to an extract â€Å"Vita Nuova†. Therefore, these comparisons suggest that most of Cummings directions in poetry were influenced by Dante’s work. His move to Norton-Harjes Ambulance Corps in New York with a long time friend from college contributed in part to his poetic influences (Bay-Cheng and Cole Barbara, 162). This is because he was putting his thoughts to practice concerning what he believes is right. He was, thus trying to deviate from the norm of fresh college graduates joining

History and Political Science. Examine the roles of men and women in Essay

History and Political Science. Examine the roles of men and women in fascist Germany - Essay Example Men were always superior with male children occupying higher pedestals than their female counterparts. Women in Germany did not hold any property rights and even upon the death of their husbands they could not inherit anything and were required to find a male guardian to care for her children. This discrimination was based on the premises that women were more emotional than men and hence their intellectual capacities were limited by their emotional nature. They were even discriminated by their men counterparts in the church who considered them weak to the temptations of the flesh because of emotions . Though church men felt that the women should be excluded from the church, they were allowed to participate in some religious ceremonies but were excluded on other activities like singing. Overtime, women gained several milestones and they started gaining little education which men felt allowed them to be better mothers and cooks. World War 1 thrust women into men roles and they excelled in the home fronts carrying out gender roles traditionally performed by men. Under the Weimar republic (1919-1933), women were given more freedom which enabled them to accomplish many goals previously under the male domain. The Weimar republic made secondary requirement a right for women in 1920 where women were officially allowed to vote. ... They believed that men were productive and creative in the spheres of politics and war whereas women were emotional and reproductive suitable for maintaining homes and the family. German women were expected to follow the "kinder, kirche und kuche" (children, kitchen, and church)4 philosophy. This foundation was the premises in which women conducts were expected to follow, and any deviants were frowned upon. The Nazi regime made women believe that through submissiveness, domesticity, and mother hood they were developing their nation and their own selves but in reality the Nazi regime wanted the men to completely oppress the women. Though not all women supported their restriction to gender roles, many women welcomed the Nazi regimes move as good for the family. The fascist Nazi regime philosophies and ideals significantly changed the employment landscape, with many intelligent women doctors, teachers, civil servants and lawyers being summarily dismissed leaving very few women professio nals. The fields left vacant by women in the professional field were filled by similarly qualified men of German origin and because women and other non German population were not formally recognized as true Germans unemployment in the German states declined sharply. The Nazi regime under Hitler expected all German men to obtain an income through hard work. They organized their finances and funded a large program for work creation. Men were sent through the National Labour Service to work in public works and conservation projects which were primarily focused on building highly networked motorways, railways lines, and reclamation projects5. Through highly developed industrialization plans aimed at rearmament, Hitler introduced

Botticelli's spring and Michelangelo's creation of adam Essay

Botticelli's spring and Michelangelo's creation of adam - Essay Example Botticelli’s Primavera and the Birth of Venus are mythological paintings where storyline is seriously pursued with due respect to its mythological lineage. Goddess Venus is depicted as Virgin Mary in unique style. Michelangelo Buonarotti 1475-1564 was the most gifted painter of the Renaissance times, outshining other artists in fine art, sculptor, and architecture. The Creation of Adam – is central to his Sistine Chapel frescoes . Michelangelo’s faith in the outward beauty is reinforced through the Creation of Adam. This can be seen in his early poetry as well where he links beauty to divinity. The Creation of Adam is a wonder in art in the sense that he has made the touch of the Divine hand central to the picture and symbol of the power of the Creator. Michelangelo was responsible for transforming the history of culture. As Wolfff\lin in Classic Art, Trans. 1952 comments: â€Å"If any one man may be held responsible for major changes in the history of culture, that man was Michelangelo, who brought about the generalized heroic style and caused place and time to be disregarded’(Stokes, 1955: 106). The delineation of Sixteenth century dress and architecture was exaggerated not at the cost of characterization but to provide dignity in presentation, it was enlarged as ‘its flowers grew from the old soil, but they waxed bigger’(Stokes, 1955: 106). It was a period of resurgence of interest in the art and culture of Greece and Rome by European civilizations. It was a reaction to the rigidity of feudalism and Church of the medieval period where individual interests were subservient to society, ruled by feudal lords for material needs and Church for spiritual aspirations. The Renaissance started in the creation of city states like Venice, Florence, and Milan, self-sustaining and creating Franciscan humanism. Such states provided economic means to keep both ends meet to the

E.E Cummings and His Influences to Writing Poetry Research Paper

E.E Cummings and His Influences to Writing Poetry - Research Paper Example Cummings was a controversial poet whose status was preceded by his poetic influence. It is noteworthy that Cumming grew in a strict Unitarian home (Dendinger, 89). However, this did not deter him from fulfilling his ambitions. He felt that his parents did not understand his free spirit, and the unique view he had about life. However, his liberated mind and the encouragement he was getting from his parents resulted into adoption of these controversial styles of writing poetry. In addition, his enrolment into school only functioned to fuel his thoughts about having a free spirit. Therefore, he did not take schoolwork as serious as anyone of his calibre was expected to by the society. In any way, it is while attending school that he developed the rebellion towards the frame of references of life. His attack on the mass mind and conservative patterns of contemplation as well as the restrictions the society had on expression originated from his staunch devotion to the person. He therefore believed in â€Å"the simple faith in the miracle of mans individuality’ (Bay-Cheng and Cole, 157). Therefore, in most of his works, he always blamed man, but idealised personality. He thus directed his critics against the foes of individual, by letting no man rest in what he believes he knows. The rhetorical function of his language is based on this foundation. Therefore, this shows that Cumming’s influences to poetry started at a tender age when he stared composing points at only ten years (Bay-Cheng and Cole, 157). This means that his open-minded and at times lenient parents encouraged him early in his life to delve into his creative side. In addition, Metcalf (374) notes that Dante who was an author but died even before Dante was born also influenced the early works of Cummings. This influence is reflected in the non-lectures that Cummings gave to the audiences he addressed. However, it was not Dante alone but also Dickens and Mallory. However, it is his controve rsial address to the Graduating class at Harvard University brought him into the public eye. This talk was about new art, in which he dismissed the admired poet Amy Lowell by referring to her as abnormal (Bay-Cheng and Cole, 160). Some of Dante’s influences are reflected in the passages of some of the works of Cumming such as â€Å"Inferno†. In this piece of work, overt references appear in brief in his passages (Metcalf, 380). Most of these references serve to underpin Cumming’s ironic and negative thoughts of the modern world. However, this influence presents itself in a different way when Cumming, just like Dante, goes through an onerous journey just to safeguard his free spirited claims. Dendinger (95) asserts that his difficult journey is talked about in the novel â€Å"Emmi† where he has quoted Dante’s optimistic visions towards life from â€Å"Vita Nuova and â€Å"Paradiso†. Another example of Cummings works is the â€Å"So shy shy shy† poem that has a conspicuous similitude to an extract â€Å"Vita Nuova†. Therefore, these comparisons suggest that most of Cummings directions in poetry were influenced by Dante’s work. His move to Norton-Harjes Ambulance Corps in New York with a long time friend from college contributed in part to his poetic influences (Bay-Cheng and Cole Barbara, 162). This is because he was putting his thoughts to practice concerning what he believes is right. He was, thus trying to deviate from the norm of fresh college graduates joining

Botticelli's spring and Michelangelo's creation of adam Essay

Botticelli's spring and Michelangelo's creation of adam - Essay Example Botticelli’s Primavera and the Birth of Venus are mythological paintings where storyline is seriously pursued with due respect to its mythological lineage. Goddess Venus is depicted as Virgin Mary in unique style. Michelangelo Buonarotti 1475-1564 was the most gifted painter of the Renaissance times, outshining other artists in fine art, sculptor, and architecture. The Creation of Adam – is central to his Sistine Chapel frescoes . Michelangelo’s faith in the outward beauty is reinforced through the Creation of Adam. This can be seen in his early poetry as well where he links beauty to divinity. The Creation of Adam is a wonder in art in the sense that he has made the touch of the Divine hand central to the picture and symbol of the power of the Creator. Michelangelo was responsible for transforming the history of culture. As Wolfff\lin in Classic Art, Trans. 1952 comments: â€Å"If any one man may be held responsible for major changes in the history of culture, that man was Michelangelo, who brought about the generalized heroic style and caused place and time to be disregarded’(Stokes, 1955: 106). The delineation of Sixteenth century dress and architecture was exaggerated not at the cost of characterization but to provide dignity in presentation, it was enlarged as ‘its flowers grew from the old soil, but they waxed bigger’(Stokes, 1955: 106). It was a period of resurgence of interest in the art and culture of Greece and Rome by European civilizations. It was a reaction to the rigidity of feudalism and Church of the medieval period where individual interests were subservient to society, ruled by feudal lords for material needs and Church for spiritual aspirations. The Renaissance started in the creation of city states like Venice, Florence, and Milan, self-sustaining and creating Franciscan humanism. Such states provided economic means to keep both ends meet to the

Principles of Business Phase Essay Example for Free

Principles of Business Phase Essay In the aspect of business management, there are several elements and characteristics that organizational leader take into consideration when analyzing the condition of the economy of a certain society or nation. These elements are mainly the certain advantages and disadvantages of each society compare to others in terms of production, resource consumption, and economic benefit. Ideally, business leaders analyze each society based on the economic advantage they posses thus, establishing its fundamental business characteristic for market selection. In the application of this concept, consider the following scenario and the characteristic of the economic advantage each respective has for market analysis and selection. a) A nation has companies with the capacity to make stereo equipment at a much lower price than other national producers because of lower cost labor. The stereo equipment is of the same quality as other international producers. The characteristic of this society is mainly absolute advantage as their production nature possesses more benefits than the other in terms of resource consumption. Ideally, each business leaders desire to have better and effective production with lesser expenses to gain greater profit. Because this society can produce the same quality standard for their product similar to others while having cheaper production cost, their have absolute advantage than the others in terms of production and market selection. Indeed, business organization will desire to utilize the absolute advantage that this nation has for greater profit. b) A country mines for a high-demand precious gem only found within that country’s borders and distributes the gems to jewelry dealers all over the world. The principle for the economic characteristic in this scenario can be considered as absolute advantage mainly because the highly demanded resources can also be produced by their society making it their concrete advantage over the others. Likewise, this characteristic can also be considered as a comparative advantage scenario as the society can also be viewed as not the most efficient producer only that they are the only possible producers. Considering their condition, they might not be the most efficient producers for other products however, they can find certain advantage through specializing and focusing on the highly demanded product, which can only be found in their resource area. c) An overseas country passes laws to protect certain business practices that other countries may find unsuitable and perhaps unethical. The protection of these business practices are not seen as abusive or exploitive within the overseas country and are also consistent with national social standards. The business principle applied in this scenario can be considered as national competitive advantage as the law passed by this nation becomes their significant advantage over the others namely their concern for protecting certain business practices. Other societies might consider this protection perhaps unethical yet this specific nation implemented them while maintaining their adherence to the national standard. As such, business organizations who see much benefit from this protection will take consider applying their production operation in this nation. Thus, the law they passed protection business operation will become their significant advantage though not absolute above others. Bibliography Johansson, Borie Karlsson, Charlie Stough, Roger (2002). Regional Policies and Comparative Advantage. Edward Elgar Publication, USA. ISBN-10: 1840648341. Porter, Michael E. (1998). The Competitive Advantage of Nations. Free Press Publication, USA. ISBN-10: 0684841479.